Getting started
First connection through your first drive.
Documentation
Build with the DRV1100BDV5.
Everything you need to wire, configure, monitor, and protect Jara's single-channel H-bridge motor controller — from a five-minute quickstart to the full electrical reference.
FW 0.2.0 · REV 5Stable channel
Start here
Quickstart
Power on, join the controller's Wi-Fi, and run the setup wizard in about five minutes — no installs, no cloud account.
Get running →~5 minHardware reference
Electrical specifications, connector pinout, and the four-layer safety system for the DRV1100BDV5 controller board.
Open reference →Web flasher
Flash or roll back firmware straight from your browser over Wi-Fi. Two-bank updates with automatic recovery if a drive fails.
Open flasher →Browse documentation
Hardware & wiring
The board, its terminals, and how to wire it.
Configuration
Tune limits, profiles, and drive behaviour.
Firmware & updates
Versions, channels, and over-the-air flashing.
Safety system
The four protection layers and how they trip.
API & integration
Drive the controller from your own tools.