Browser-based setup
Connect to the controller’s Wi-Fi to configure your system from a browser.
18065 series
Available NowA mainstream single-channel brushed DC motor controller planned for the Jara product line.
Follow the product installation instructions and electrical ratings. Maximum battery input is 65 V DC. Do not use a voltage regulator or DC/DC converter on the battery input.
Specifications and protection
The operating envelope, in one canonical table.
Use these values with the installation guidance and product documentation linked below.
Motor typeBrushed DC, single-channel full H-bridge
Operating voltage10–65 V DC
Continuous current80 A
Motor channels1
Configuration and diagnosticsWi-Fi access point with browser interface
Control inputsVariable throttle, variable brake, compatible 3.3 V RC receiver
Accessory supply12 V DC, 8 A; follows battery voltage below 12 V
Auxiliary outputsTwo general-purpose outputs for use with the 12 V supply
Fan control12 V fan output and PWM fan control based on controller temperature
Voltage Range
10-65V DC
Continuous Current
80A
Motor Channels
1Brushed DC
Wireless Configuration
Supported
Platform capabilities
Built to be configured, monitored, and maintained.
Flexible control inputs
Supports variable throttle and brake inputs, plus compatible 3.3 V RC receivers.
Live diagnostics
Monitor controller operation and review diagnostics through the built-in web interface.
Accessory power and cooling
An onboard 12 V accessory supply and temperature-controlled fan outputs support your installation.
Documentation
Everything to get this board running.
Need this board to do something specific?
Custom firmware on the 18065 series, or a modified board for your application — our engineering team designs both.