Browser-based setup
Join the controller's Wi-Fi and configure drive and brake ramps, current authority, battery profile, and autobrake timing from a web page — no toolchain to install.
110085 series
Available nowA high-performance single-channel controller for brushed DC motors. General-purpose: robotics, industrial drives, light EVs, and DIY builds. Configure, monitor, and protect from any browser.
General-purpose motor controller for DIY and professional builds. Not certified for safety-critical applications.
Specifications and protection
The operating envelope, in one canonical table.
Use these values with the installation guidance and product documentation linked below.
Motor typeBrushed DC, single channel
Operating voltage12–85 V DC
Continuous current100 A
Surge / impulse current200 A for a few seconds · 300 A startup impulse
Over-current protectionStaged 100 / 200 / 300 A defaults
Under-voltage protectionBattery-profile threshold · 30 s default trip delay
Over-voltage protectionDrive inhibited at 86 V · critical at 87 V
Operating temperature-10 to +50 °C
Dimensions5.23" × 4.02" × 1.13"
ConnectivityWi-Fi access point (browser web app)
ProtectionOver-voltage · Over-current · Under-voltage · Thermal · Short-circuit
ConfigurationBrowser web app served from the controller
Voltage Range
12–85V
Continuous
100A
Surge
200A
Impulse
300A
Platform capabilities
Built to be configured, monitored, and maintained.
Full protection chain
Staged over-current limiting, selective voltage protection, thermal throttle inhibit, and short-circuit lockout are surfaced live in the web UI.
Live telemetry
Watch throttle input, motor current, direction, and active faults stream in real time while it runs.
Standard control inputs
Drive it from a 0–3.3 V throttle and brake, an RC receiver or speed sensor, and discrete direction inputs — wire it into whatever your build already uses.
Field-updatable firmware
Flash new firmware from the browser as the platform gains features — the hardware keeps up.
Custom firmware ready
Need behavior we don't ship? We'll write custom firmware for this exact board — that's our services model.
Documentation
Everything to get this board running.
First-boot quickstart
Power on safely, join the controller Wi-Fi, and complete the guided initial setup.
Start setup →Troubleshooting
Diagnose power, connection, motor-output, temperature, and recovery issues by symptom.
Find a solution →Datasheet & pinout
Electrical specs, terminal layout, and wiring essentials for the controller.
View datasheet →Fault & LED reference
Protection thresholds, fault codes, and LED states specific to this controller.
Read reference →Firmware & updates
Review compatible firmware, configuration parameters, and safe browser-flashing steps.
Open firmware guide →Need this board to do something specific?
Custom firmware on the 110085 series, or a modified board for your application — our engineering team designs both.